Jamestown EV/RV Pedestal – 2 Receptacles
Jamestown EV/RV Pedestal – 2 Receptacles
Jamestown EV/RV Pedestal – 2 Receptacles
$1,325.00
Jamestown Advanced has pioneered an EV/ RV Pedestal station that has the option for 2-RV receptacles or no-RV receptacles with a Level 2 Wallbox Pulsar Plus EV Charger, all in one unit!
RV Parks and Campgrounds can cater to both the RV and EV enthusiast and easily monetize a station by monitoring electricity usage via the myWallbox app.
Jamestown Advanced has pioneered the EV and RV combo unit for use in RV Parks and Campgrounds! Jamestown has partnered up with Wallbox to give the Electric Vehicle RV enthusiast the ability to charge their EV while they are camping with an all-in-one direct bury pedestal or pad mount station. Easily monetize the station by collecting payment for electricity usage via the myWallbox app (no attendant required, stable Wi-Fi connection required).
ADDITIONAL EV INFO
- Factory installed integrated Wallbox Pulsar Plus Level 2 EV charging unit.
- EV charging capability is 40A (240/208v).
- 25 foot charging cable and J1772 charging protocol.
- Wallbox installed solid-state breaker that auto-resets as needed and is independent of the RV receptacles.
- The Wallbox breaker occupies the first 2 positions on the circuit breaker base. No additional breakers or panel is necessary and everything is prewired at Jamestown Advanced.
- Additional Wallbox Pulsar Plus info is available below.
ADDITIONAL RV INFO
- Direct Bury PEVCH-XX-PED - To be buried 2 feet in the ground.
- Pad Mount PEVCH-XX-PAD - To be permanently mounted to a concrete pad for security and stability. Comes with pad-mount bracket and screws to attach bracket to pedestal.
The EV/RV Pedestal has no meter socket and is therefore Unmetered (but can be monitored for power usage via the Wallbox app, see below).
- Rated at 120A and single phase, not to exceed 120 volts.
- The EV/RV station is available with 2 factory-installed receptacles for RV plug-in. Available combo's are: 50/20, 30/20, or 20/20.
- NEMA 4 rated, UL listed.
- Manufactured with G90 galvanized steel and finished with an electrostatic gray powder coated high-shine finish. This coating inhibits damage from impacts, moisture, chemicals, ultraviolet light, and extreme weather conditions — preventing scratches, chips, abrasion, corrosion, fading, and other typical wear issues.
- Removable hub (plate) on the top with 4 screws that not only fit a 1 ¼” hub, but also fit ¾” and a 1” hub.
- Wire range of #6 AWG – 350 MCM, loop-feed lugs, with a 6-position circuit breaker base. Note: KOA has issued a regulation that any sites that are an EV/RV combo must have home-runs to the distribution panel, no looping is allowed. Jamestown Advanced recommends this protocol.
- Jamestown Advanced Power Outlets are proudly made in Jamestown, NY, USA!
Additional information
| Brand | |
|---|---|
| Installation Type | |
| Receptacle Configuration | |
| Application | |
| Amp Rating | |
| Hub Opening | |
| Dims: L x W x D | Direct Bury 89.25 x 10 x 5.125 – Pad Mount 65.125 x 10 x 5.125 inches |